Here are the top 5 softball batting tee drills, in no particular order, and in my opinion. They are the ones that can really help turn you into an elite batter.
Drill 1 - Back Knee Down
Right Angle Drill
Purpose: To develop upper-body strength and quickness. The drill helps the player stop lunging by eliminating lower-body movement. The drill can reduce upper cutting. It emphasizes keeping the barrel above the hands and using correct timing.
Procedure: Use a low T for this drill. The hitter kneels on a towel with the back knee at a 90-degree angle, keeping the shoulders on a level plane. The drill can also be done off a soft toss. The player sees the bat hit the ball.
Drill 2 - Bingo
Purpose: To develop a level swing and proper mechanics by offering instant feedback.
Procedure: Position two Ts at the same height with one directly behind the other. The batter drives the back ball into the front ball. The farther apart the Ts, the more difficult it is to hit the front ball because errors are magnified. The path of the hit provides quick feedback on the mechanics of the swing. If the hitter misses to the left, she has an outside-inside swing. If the hitter misses by going above, she is dropping her back shoulder. When successful, the hitter should yell "Bingo."
Drill 3 - Balance Beam
Purpose: To check balance during a swing.
Procedure: The hitter stands on a two-by-four or with both feet on the inner edge or a tire while hitting off the T. A hitter with good balance can stay on the beam throughout the swing.
Drill 4 - Look at Pitcher, Then Hit
Purpose: To practice refocusing from the pitcher to the point of contact.
Procedure: The batter at a T looks out at an imaginary pitcher and then refocuses on the T and takes a normal swing.
Drill 5 - Two Ts
Purpose: To concentrate on hitting to and through the ball on the sweet spot of the bat with a line drive contact.
Procedure: Two Ts are placed at the same height one directly in front of the other with a ball on each. The batter tries to drive the bat through the ball on the first T and into and through the ball on the second T.
Christmas Sales Milwaukee 3002-1 Electricians Kit 7 Amp 1/2-Inch Right Angle Drill with D-Handle 201
Dec 09, 2011 07:59:07
Click for larger image and other views
Christmas Sales Milwaukee 3002-1 Electricians Kit 7 Amp 1/2-Inch Right Angle Drill with D-Handle Feature
- Electrician's right angle drill for drilling between joist and studs, in tight corners or in close quarters
- Powerful 7 amp motor and 3 speed ranges
- Steel hardened shafts; designed for use with up to 2-9/16-inch selfeed bits
- Includes case, side handle, RAD assembly, 9/16-inch open wrench, 3/16-inch socket wrench, chuck remover bar
- Weighs 10.3 pounds; 5-year warranty
Christmas Sales Milwaukee 3002-1 Electricians Kit 7 Amp 1/2-Inch Right Angle Drill with D-Handle Overview
3002-1 Model Code: AB (part# 3002-1) This item features: -Trigger speed control. -Locks tight at any position. -Chuck remover bar. -Steel hardened shaft. -Head and handle swivel 360 . -Glass reinforced handles. -All ball and roller bearings. -Helical cut, heat-treated gears. -Chuck Size: 1/2 in. -Chuck Type: Keyed. -Voltage: 120.00 VAC. -Amps: 7.00 A. -Cutting Cap.: 1/2 in (steel) [Max]. -Cord Length: 8 ft. -Handle Type: D-Handle. -Includes: 9/16 in. Open End Wrench, 3/16 in. Socket Wrench, Chuck Remover Bar, Side Handle, Impact Resistant Carrying Case. -Type: Right Angle Drill. -Price is for 1 Kit. Testing and approvals: -Complies with OSHA and UL requirements. Model Code Model Description AASpeed Range (RPM):0 - 335 Low, 0 - 750 High, Gear Reduction:Quadruple ABSpeed Range (RPM):0 - 400 Low, 0 - 900 High, Gear Reduction:Double, Length:14 3/4 in ACSpeed Range (RPM):335 Low, 750 High, Gear Reduction:QuadrupleChristmas Sales Milwaukee 3002-1 Electricians Kit 7 Amp 1/2-Inch Right Angle Drill with D-Handle Specifications
D-handle power and a right angle drive head make this drill package perfect for stud and joist drilling. Its powerful 7 amp motor and three speed ranges make this a versatile tool that will handle a wide range of applications, including drilling between joist and studs, in tight corners, or in close quarters. It handles up to 2-9/16-inch selfeed bits, and delivers 0-400 rpm on the low side, 0-900 rpm on the high side, and 0-600 rpm with the right angle drive removed. This rugged unit comes in an impact-resistant carrying case and includes a side handle for ease of operation.SAVE NOW on Christmas Sales Offers below!
Available In Stock. |
| This Christmas Milwaukee 3002-1 Electricians Kit 7 Amp 1/2-Inch Right Angle Drill with D-Handle ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
