I recently worked with one of my readers who asked me for a second opinion on a video swing analysis that he had just received that brought up an interesting point about adjusting swing plane which I thought I would share with you.
He went for the lessons with the goal of increasing his driving distance by 10-15%. He was also experiencing pushed shots to the right.
Right Angle Drill
The video analysis revealed that his swing plane on the back swing was very flat. Being a large-chested man who lacked a little flexibility in his upper body, he had developed a tendency to "wrap" the golf club around his body on the backswing. The net result of which was a shallow downswing that came into the ball from a sharp inside-out club head swing path that often caused the pushed shot to the right.
What he needed to do to help correct the push problem and also improve his distance potential was to adjust his swing plane to a more upright plane.
This would cause the club head swing path to move more down the target line giving him more margin for error at impact, and it would create more potential energy of the back swing from a higher top swing position that would result in increased swing speed at impact.
His instructor correctly picked this observation up. However, the way he presented the fix for the problem was a little misleading.
His advice was to "raise the hands" more on the backswing which essentially was the end result that he was looking for that would come with a more upright swing.
The reason why I thought I would focus on this is that I often read and hear about "raising the hands" as a means of creating a more upright swing. This is also a technique used by some instructors to encourage more trunk rotation on the backswing to increase backswing torque and swing speed.
Why I say this is a little misleading is that the student is presented with an instruction that can create other problems with their swing. As it turned out, that was what happened with our reader.
His instructor was encouraging him to get his hands up above his head and shoulders which encouraged more trunk rotation and raised his swing plane which is what his instructor was looking for, but due to his lack of flexibility, it created a lot of muscle tension in his left side and also created a severe break of his left elbow...
Swing plane is not governed by your hand movement - it is governed by shoulder movement. The higher hand position is the "result" of a more up right swing, not the means to get there.
In order to adjust your swing plane, your focus has to be at the start of the swing - not at the end of the swing trying to achieve a result that many golfers have no hope of reaching due to their lack of flexibility.
Swing plane is affected by how you rotate your left shoulder - the more you rotate the shoulders "horizontally" around your spine the flatter the swing plane, as was the case with our reader.
To increase the swing plane angle, rotate your shoulders more "vertically" by driving the left shoulder down instead of around at the start of the swing.
Initiating the backswing turn with a vertical shoulder movement instead of "lifting the hands", helps you to remain relaxed in your left arm and maintain a stable left side with no elbow break - incidentally, this also results in less risk of an early hand release from the top of the swing.
We all know that increasing backswing torque increases swing speed.
Rotating your shoulders more achieves this end. However, you will not generate any more shoulder torque by breaking the left elbow just to get your hands into a higher position - you end up loosing torque.
The reason why you have to break the elbow in the first place is because your shoulders will not turn any further. If they have reached their limit of flexibility that's the maximum torque you will achieve from the trunk turn.
The left elbow breaks because the arm muscle are unable to match the tension that has been built up in the trunk turn. Once the break occurs you release the torque contribution from your arm muscles which essentially "opt" out of the total torque build up in the turn.
The net effect is that you loose backswing torque after the break occurs.
Breaking the left elbow also creates another moving part in the swing that has to be coordinated back to the straight position at impact making the timing of the swing more difficult.
Be very careful about what you hear and read about a "high hand position". Yes, it is the ideal position for power and consistency in the swing that we see in every professional swing, but you have to have the flexibility to achieve it.
If you lack the flexibility, do not attempt this as you will create more problems with your swing than you solve.
Recommendations:
1. Never try to swing beyond your "natural" swing range which is what this instructor was advising our reader. Always swing within your natural range of flexibility.
2. A move to a higher swing plane angle is good for both swing consistency and swing speed - you get there by more vertical rotation of the shoulder that comes from driving the left shoulder downwards at the start of the swing - not by trying the raise your hands above your head.
3. Do not break the left elbow. Even though your hands may not be able to go beyond shoulder height, maintain a firm left side to retain backswing torque and simplify the timing of the swing.
4. In order to achieve more shoulder turn, you have no other choice but to improve the flexibility of your back muscles. - Go through simple lower back stretching routines every day for 2-3 weeks and you will increase your turn angle by as much as 10º.
Good luck!
Regards,
Les
Christmas Sales Bosch 1132VSR 3.8-Amp 3/8-Inch Right Angle Drill 201
Dec 16, 2011 15:03:48
Click for larger image and other views
Christmas Sales Bosch 1132VSR 3.8-Amp 3/8-Inch Right Angle Drill Feature
- 3.8 Amps, 0-1100 RPM
- Low profile design for drilling in close quarters
- Easy to actuate paddle-type switch
- Variable speed dial for matching speed to the application
Christmas Sales Bosch 1132VSR 3.8-Amp 3/8-Inch Right Angle Drill Overview
Low profile & small chuck offset makes it ideal for drilling in tight spaces - Includes: Chuck #3 608 571 000 * Chuck key #CRK005 - Specifications: Model Number: 1132VSR, Amperage: 3.8, No Load RPM: 0-1,100, Spindle Size: 3/8, Length: 11-3/4, Weight (Lbs.SAVE NOW on Christmas Sales Offers below!
Available In Stock. |
| This Christmas Bosch 1132VSR 3.8-Amp 3/8-Inch Right Angle Drill ships for FREE with Super Saver Shipping. |
Price : Click to Check Update Prices Please. |
